Datasheet

DIGITAL MULTIMETERS & SYSTEMS
www.keithley.com
1.888.KEITHLEY
(U.S. only)
A Greater Measure of Confidence
A Tektronix Company
Make Demanding Measurements with Confidence
The Model DMM7510’s design makes the most of Keithley’s low level measurement expertise.
Features like the low noise input stage and the 32-bit A-to-D converter allow this instrument to
deliver DC accuracies typically only found in metrology-grade instrumentation—but at about half
the price of those solutions. The Model DMM7510’s 100mV, 10Ω, and 10µA ranges deliver the
sensitivity needed to measure low signals with confidence when characterizing today’s demanding
electronic designs. In addition to one- and two-year accuracy specifications, an auto-calibration
function ensures greater accuracy between calibration cycles.
2µV
1µV
0µV
–1µV
–2µV
Volts
6½ Digit 8½ Digit DMM7510
One Power Line Cycle
Noise Performance
The DMM7510 provides noise performance
equivalent to or better than many 8½-digit DMMs.
Comparison of the Model DMM7510’s 1V DC noise performance with that of typical 6½- and
8½-digit multimeters. All data was taken at 1 NPLC with a low thermal short applied to
the input.
15 Measurement Functions
The DMM7510 provides 15 basic measurement functions. In addition to the digitizing voltage and
current functions, it includes capacitance, ACV and ACI, temperature (RTD, thermistor, and thermo-
couple), 2- and 4-wire resistance, dry circuit ohms, period, frequency, diode test, and DC voltage
ratio. The instrument’s flat menu structure allows for fast configuration and improves usability. Its
intuitive design lets you learn how to operate the instrument and begin making device measurements
faster and with greater confidence.
RTD, Thermistor, Thermocouple
Ordering Information
DMM7510 7½-Digit Graphical
Sampling Multimeter
DMM7510-NFP
7½-Digit Graphical
Sampling Multimeter,
with No Front Panel
DMM7510-RACK
7½-Digit Graphical
Sampling Multimeter,
with No Handle
DMM7510-NFP-RACK
7½-Digit Graphical
Sampling Multimeter,
with No Front Panel
and No Handle
Accessories Supplied
1756 Test Leads
USB-B-1 USB Cable, Type A to
Type B, 1m (3.3 ft)
CA-180-3A
TSP-Link/Ethernet Cable
Documentation CD
DMM7510 QuickStart Guide
Test Script Builder Software
(available at www.keithley.com )
KickStart Startup Software
(available at www.keithley.com)
LabVIEW and IVI Drivers (available
at www.keithley.com)
DMM7510
7½-Digit Graphical Sampling Multimeter
Graphical sampling DMM Graphical sampling DMM