Instructions
Table Of Contents
- Model DMM6500 6½-Digit Multimeter User's Manual
- 1 Introduction
- 2 Front-panel overview
- 3 Using a remote interface
- 4 Making basic front-panel measurements
- 5 Measuring DC voltage with high accuracy
- 6 Measuring 4-wire resistance with offset compensation
- 7 Scanning temperature at a set time interval
- 8 Grading and binning resistors
- 9 Measuring power using digitizing and TSP-Link
- 10 Troubleshooting FAQs
- About this section
- Where can I find updated drivers?
- Is there any software to help me get started?
- Why did my settings change?
- Why can't the DMM6500 read my USB flash drive?
- How do I upgrade the firmware?
- How do I change the command set?
- How do I save the present state of the instrument?
- How do I save what is displayed on the screen?
- What is the ethernet port number?
- 11 Next steps
- Contact information
In this section:
Front-panel overview ................................................................ 2-1
Instrument power ..................................................................... 2-3
Touchscreen display ................................................................ 2-4
Interactive swipe screens ......................................................... 2-7
Menu overview ....................................................................... 2-14
Front-panel overview
The front panel of the DMM6500 is shown below. Descriptions of the controls on the front panel follow
the figure.
Figure 1: DMM6500 front panel
POWER switch
Turns the instrument on or off. To turn the instrument on, press
the power switch. To turn it off, press and hold the power switch.
The LED is green when the instrument is on and the LED is
amber when turned off.
HOME key
Returns the display to the home screen.
MENU key
Opens the main menu. Press the icons on the main menu to open
channel, measure, views, trigger, scripts, and system screens.
For details, refer to Menu overview (on page 2-14).
Section 2
Front-panel overview