Datasheet

TEK.COM 9
DAQ6510 Data Acquisition and Logging, Multimeter System
With its fron panel connections, the DAQ6510 can be used as a
6½-digit DMM.
Use as a DMM for Test and
Troubleshooting
The DAQ6510 has front panel input terminals that enable
use of the DAQ6510 as a 6½-digit DMM. When multiple
channel measurements are not needed, the DAQ6510
functions as a DMM. Use the DAQ6510 with its front panel
terminals to troubleshoot a test setup, a circuit, or to verify
the value of a component. Save bench space and cost
with an instrument that performs like a DMM and a data
logger. The dual functionality enables maximized utilization
of your instrument.
Reduce Test System Downtime
and Save on Lifetime Costs
Unplanned system downtime results in loss of
productivity and delayed product shipments or loss of
valuable development time during product audit testing,
accelerated life testing, and environmental testing. To
avoid unplanned downtime, the DAQ6510’s plug-in
switch modules have counters for each relay that monitor
the number of relay contact closures. Thus, when relay
switch closures approach the manufacturers’ relay life
specification, the switch card module can be replaced
during scheduled maintenance.
Many of the plug-in switch modules have multi-pin D-sub
connectors to ensure secure, minimal maintenance
connections in automated test environments. The D-sub
connectors minimize downtime when changing plug-in
switch modules during system maintenance or during the
setup of a new test system.
The DAQ6510 is specified for both 1-year and 2-year
accuracy specifications with little difference between
the 1-year and 2-year specifications. Thus, for most
applications, the calibration cycle for the DAQ6510 can
be two years. This will reduce the life cycle costs on your
DAQ6510 by half.
The DAQ6510 will save on unplanned system
downtime, minimize planned downtime, and save on
lifetime calibration costs making the DAQ6510 a highly
economical asset in any test system.