Datasheet

TEK.COM 5
DAQ6510 Data Acquisition and Logging, Multimeter System
Monitor Any Temperature Range and
Select Optimal Accuracy Using a
Wide Range of Temperature Sensors
The DAQ6510 can process signals from any of eight
thermocouple types to test over an extreme range of
temperatures, –200°C to 1820°C. For more accurate
temperature readings over a more narrow temperature
range, the DAQ6510 can measure temperature from
–80°C to 150°C with a 2-year accuracy of 0.08°C using
2.5 kΩ, 5 kΩ, and 10 kΩ thermistors. Alternatively, the
DAQ6510 can measure temperature between –200°C
and 850°C using resistance temperature detectors
(RTDs) with 2-wire, 3-wire, and 4-wire configurations.
Using a 4-wire RTD, temperature can be measured with
with an excellent 2-year accuracy of 0.06°C.
The Series 7700 plug-in switch modules have multiple cold
junction compensation (CJC) circuits. The CJC circuits are
spaced around the module to ensure maximum accuracy
for all channels measuring thermocouples.
Save Valuable Time with Continuous
Monitoring of Scan Test Status
Never lose time with a test in which a problem such as
a broken wire, a mis-wired connection, or a defective
DUT can invalidate days of data. Use the scan status,
swipe screen to continuously monitor channels. The
status screen shows the percentage of the test that has
been completed, the number of scans that have been
completed, measurements on channels selected for
monitoring, and whether any measurements are out of
range. A quick view of the display can give an indication
of the status of the test at any time during the test. In
addition to an indication of measurements in an overflow
condition, limit settings can be programmed for any
channel. The Status screen will display an out-of-limit
indication when any channel’s measurement is outside
the channel’s limit settings.
Maintain an Automated Test while
Interacting with the Instrument
Need to perform a quick check to ensure there are no
problems with the measurements that the DAQ6510
is taking? Want to review the trend of the data? The
DAQ6510 can be operated from the front panel while
a test is in progress. Data can be viewed in a table or
displayed on a plot without interrupting an automated
scan sequence.
Use a pinch and zoom display feature for detailed study of test data.
Graphically view data during or at the end of a test. Display up to 20
channels on one plot.
Quickly and easily monitor the status of a test using the DAQ6510 scan
status screen.