Datasheet

Datasheet
TEK.COM4
Test a Wide Range of Devices and Components with
6½-digit DMM High Performance Measurements
Make your measurements with instrument-grade quality. The DAQ6510 is a fully-featured 6½-digit DMM. The chart
below shows all of the DAQ6510’s 15 measurement functions and ranges. All these measurement functions can be
used with the various plug-in switch modules. Furthermore, a channel can be programmed for enhanced measurement
features to address requirements for tighter tolerance or higher speed.
For maximum accuracy, measurements can be filtered and integrated over a range of time intervals. Low resistance
readings can be improved with a thermal offset compensation measurement technique. The DAQ6510 excels in low
resistance measurement with 1 µΩ sensitivity.
For maximizing measurement speed, make measurements as short as 0.0005 power line cycles (PLCs) or 8.3 µs for
60 Hz power lines (10 µs for 50 Hz power lines). To analyze transient signals, use the DAQ6510’s digitizing function to
sample a voltage or current waveform at up to 1M sample/s.
DAQ6510 MEASUREMENT CAPABILITIES
DC Voltage
AC Voltage
DC Current
AC Current
Resistance (2-wire)
Resistance (4-wire)
Capacitance
Period
Frequency
Diode
Digitize Voltage
Digitize Current
100 nV
100 nV
Logarithmic Scale
Linear Scale
10 pA
100 pA
1 µΩ
0.1 pF
–200°C
–80°C
–200°C
1820°C
150°C
850°C
3.3 µs
3 Hz
10 µV
10 nA
1010 V
750 VRMS
10.1 A
10.1 A
120 MΩ
10 µΩ 120 MΩ
120 µF
333 ms
300 kHz
1010 V
10 µV 12 V
(Selectable: 10 µA / 100 µA / 1 mA / 10 mA source)
10.1 A
1 f 1 p 1 n 1 µ 1 m 1 1 k 1 M 1 G
Thermocouple
Thermistor
2-, 3-, 4-Wire RTD
–500° 0° 500° 1000° 1500° 2000°
DAQ6510’s 15 measurement functions and ranges.