Datasheet

Datasheet
TEK.COM2
function to a channel or a group of channels. Then define both the time interval between measurements and scans if
multiple scans are required. That is the minimum set of parameters needed to run a test. There are additional optional
parameters to adjust the measurements and the switching to meet a specific application. One option eases the
identification of channels by allowing the creation of a name for each channel. Do all this from two menus and see – on one
screen – how each channel is configured. The touchscreen, graphic display shows the channel setup and the measurement
programmed for each channel.
To test channels during setup, manually close channels on the setup screen. The measurement on that channel is
displayed next to the closed channel. Thus, channel performance can be verified during set up or debugged if the
measurement is out of the expected range before the test is executed.
Maximize the Range of Tests with an Extensive Array of Plug-In
Switch Modules
Build a DAQ6510 test system with a selection of 12 plug-in switch modules with a wide range of functionality. Select from
high-density, 40-channel multiplexer modules, a 6×8 matrix module, and multiplexer modules with digital I/O and analog
output. Also select a control module and two RF modules with 2 GHz and 3.5 GHz bandwidths. Thus, the DAQ6510 with its
12 switch modules provides an extensive range of flexibility to build a wide range of data acquisition or test systems.
Channels can be configured for any DMM measurement.
For example, measure the temperature of devices in an
environmental chamber with thermocouples using the plug-in
switch modules that have automatic cold reference junction
compensation for thermocouple measurements. Measure up
to 80 devices with two switch modules. Also measure other
parameters in addition to temperature. The low frequency,
multiple pole switch modules can allow measurement of
voltage, 2-wire- and 4-wire resistance, and frequency. In
addition, two modules have current measurement channels.
Series 7700 Plug-in Switch Modules.