Datasheet

The DAQ6510 is a precision data acquisition and logging
system that creates a new level of simplicity compared with
the often complicated configuration and control found in many
stand-alone solutions. A large 5-inch (12.7 cm) multi-touch
display will guide users through set-up, data visualization,
and analysis, removing the necessity of a PC and custom
software for many applications. If you prefer or require a PC,
a complement of IVI and Labview drivers and the Keithley
KickStart Instrument Control Software are available to help
with any application.
Using Keithley’s newest 6½-digit multimeter technology,
you will find even greater accuracy, functionality, and speed.
Two-year accuracy specifications are included, so you can
be assured your critical measurements remain accurate and
fully traceable.
With 12 plug-in switching and control modules available
and two module slots, you can build a test system that can
measure or control up to 80 devices-under-test (DUTs) in a
multiplexing configuration. With two 6×8 matrix modules, a
total of 96 crosspoints, the DAQ6510 can test one or multiple
ICs. For high volume production testing, select a solid
state multiplexer module to maximize throughput with 800
channels/s scanning speed and minimize downtime compared
with fixed life, electro-mechanical relays. A number of modules
have cold junction compensation, temperature references
for thermocouple temperature monitoring of devices during
environmental testing, and HALT and HASS accelerated life
testing. Even switch signals from wireless devices with RF
modules having a maximum switching frequency of 3.5 GHz.
Key Features
• Large, 5-inch (12.7 cm) multi-touch capacitive
touchscreen with graphical display
• 2-year specified, full featured, traceable 6½-digit
multimeter with 0.0025% DCV (1 V, 10 V ranges)
basic accuracy
• Standard LAN/LXI and USB-TMC communication
interfaces
• Optional interfaces include GPIB, RS-232, and
TSP-Link
®
Technology
• 12 different switch, RF, and control modules to
connect to as many as 80 DUTs in one test setup
• Up to 80 2-pole channels of thermocouple, RTD, or
thermistor temperature measurements
• Scanning speeds as high as 800 channels/second
with the solid state relay module
• Front panel jacks for stand-alone DMM operation
• KickStart coding-free instrument control software with
a data acquisition and logging application
• Three-year warranty
Visualize, Execute, and Debug
Your Test Setup in Minutes
Build a test sequence and define the required
measurements from one setup screen. First, select the
channels that will be used. Next, assign a measurement
DAQ6510 Data Acquisition
and Logging, Multimeter System
Datasheet