Datasheet

www.keithley.com
1.888.KEITHLEY (U.S. only)
A GREATER MEASURE OF CONFIDENCE
Switch/Control Module Capabilities
SWITCH/MEASURE SYSTEMS
8
Integra Series Multimeter/Switch Systems
Module Selector Guide
This selector guide may prove helpful in identifying the best module for a specific application. Install up to five
modules at a time in the Model 2750 mainframe or two modules in the Model 2700 or 2701 mainframe.
Max.
# Analog Type of Max. Switched Contact Switch
Module Inputs Configuration Connector Voltage Current Bandwidth Life Speed Other
7700 20 Multiplexer 1×20 or Screw 300 V 1 50 MHz 10
8
3 ms Maximum power = 125VA.
w/CJC two 1×10 terminals 2 current measure channels.
7701 32 Multiplexer 1×32 or D-sub 150 V 1 A 2 MHz 10
8
3 ms Maximum power = 125VA.
two 1×16
7702 40 Multiplexer 1×40 or Screw 300 V 1 A 2 MHz 10
8
3 ms Maximum power = 125VA.
two 1×20 terminals 2 current measure channels.
7703 32 Multiplexer 1×32 or D-sub 300 V 500 mA 2 MHz 10
8
1 ms Reed relays.
two 1×16
7705 40 Independent N/A D-sub 300 V 2A 10 MHz 10
8
3 ms Maximum power = 125VA.
SPST
7706 20 Multiplexer 1×20 or Screw 300 V 1 A 2 MHz 10
8
3 ms 2 analog outputs.
w/CJC two 1×10 terminals 16 digital outputs.
Maximum power = 125VA.
7707 10 Multiplexer/ 1×10 or D-sub 300 V 1 A 2 MHz 10
8
3 ms 32 digital I/O.
Digital I/O two 1×5 Maximum power = 125VA.
7708 40 Multiplexer 1×40 or Screw 300 V 1 A 2 MHz 10
8
3 ms Maximum power = 125VA.
w/CJC two 1×20 terminals
7709 48 Matrix 6×8D-sub 300 V 1 A 2 MHz 10
8
3 ms Connects to internal DMM.
Daisy chain multiple cards
for up to a 6×40 matrix.
Maximum power = 125VA.
7710 20 Multiplexer 1×20 or Removable 60 V 0.1 A 2 MHz 10
10
0.5 ms Solid state relays, 60V max.
w/CJC two 1×10 screw 500 channels/second scan rate.
terminals
7711 8 Multiplexer Dual 1×4 SMA 60 V 0.5 A 2 GHz 10
6
10 ms Insertion loss <1.0dB @ 1GHz.
VSWR <1.2 @ 1GHz.
7712 8 Multiplexer Dual 1×4 SMA 42 V 0.5 A 3.5 GHz 10
6
10 ms Insertion loss <1.1dB @ 2.4GHz.
* Can be disconnected from internal DMM for routing external signals
Connector Guide for Keithley Integra Series Modules
Module Connector Type Supplied Accessories Available Accessories
7700 Oversized Screw Terminal Strain Relief 7401 TC wire
7701 50-pin female D-sub & 25-pin female D-sub 7789 connector kit 7790 connector kit, 7705-MTC-2 & 7707-MTC-2 cables
7702 Oversized Screw Terminal Strain Relief —
7703 Two 50-pin female D-sub 7788 connector kit 7705-MTC-2 cable
7705 Two 50-pin female D-sub 7788 connector kit 7705-MTC-2 cable
7706 Screw Terminal Strain Relief 7401 TC wire
7707 50-pin male D-sub & 25-pin female D-sub 7790 connector kit 7789 connector kit, 7705-MTC-2 & 7707-MTC-2 cables
7708 Oversized Screw Terminal Strain Relief 7401 TC wire kit
7709 50-pin female D-sub & 25-pin female D-sub 7790 connector kit 7789 connector kit, 7705-MTC-2 & 7707-MTC-2 cables
7710 Quick Disconnect Screw Terminal Strain Relief 7401 TC wire kit
7711 SMA — 7711-BNC-SMA & 7712-SMA-N adapters, 7712-SMA-1 & S46-SMA-0.5,-1 SMA cables,
7051-2,-5,-10 BNC cables
7712 SMA — 7712-SMA-N adapter, 7712-SMA-1 & S46-SMA-0.5,-1 SMA cables