Datasheet

www.keithley.com
1.888.KEITHLEY (U.S. only)
A GREATER MEASURE OF CONFIDENCE
Overview
SWITCH/MEASURE SYSTEMS
6
Integra Series Multimeter/Switch Systems
Built-in
independently
programmable
alarm limits
per channel.
View slot capacity
and channel
closure status
from front panel.
Front panel input
jacks simplify
manual probing,
troubleshooting,
and calibration.
Open lead detection
protects against
false readings
due to lead
disconnections.
Familiar DMM-like front
panel scheme makes it
easier to use on bench or
rack. Select or change
functions with the push
of a button.
1Ω range with
1µΩ resolution
Voltage clamped
ohms (dry circuit)
clamps voltage to
20mV.
Non-volatile memory allows
time-stamped storage of
110K readings. Has built-in
real-time clock.
Open or close single or
multiple channels from
the front panel.
Manually step through
channels or scan
automatically. Each
channel independently
configurable.
Initialize the system
with one of three
fully programmable
set-up conditions.
Use mX+b or 1/x %
scaling to convert
sensor/transducer
outputs directly into
engineering units.
Built-in digital I/O lines
provide for control, external
triggering, and HI/LO
alarm/limit outputs.
Trigger Link enables tightly
synchronized triggering
with other instruments in
large ATE systems.
GPIB and RS-232
interfaces are
standard.
Built-in noise rejection
circuitry ensures sta-
ble, predictable
measurements.
IDC connectors on
selected modules are
compatible with standard
ribbon cable.
Rugged D-sub
bulkhead connectors
on selected modules.
Built-in relay cycle
counters on each module
for ease of maintenance.
A variety of measurement and control
modules make it simple to mix, match, and
change input signals or control lines whenever
needed. Install up to five modules at once to
create a system of up to 200 channels.
Model 2750