Datasheet

www.keithley.com
1.888.KEITHLEY (U.S. only)
A GREATER MEASURE OF CONFIDENCE
System Configuration Examples
SWITCH/MEASURE SYSTEMS
44
Integra Series Multimeter/Switch Systems
DUT1
DUT2
DUT3
DUT4
DMM Input HI
DMM Sense HI
*Common Side Bus
D-Sub
Connectors
**Ch. 33
(Open)
Ch. 35
Ch. 34
User
Installed
Jumpers
7701
User
Configurable
Screw
Terminals
2750
DMM
*NOTE: Common side connections must be made carefully to eliminate all lead
resistance from the 4-wire ohms measurement. The common side bus
should be a single wire or bus bar that connects the HI side of all the
DUTs. DMM Input HI should be connected to one end of the common
side bus and DMM Sense HI should be connected to the other end.
**NOTE: Refer to ROUTE:MULT
section of the 2700, 2701,
or 2750 manual for more
information.
Sense HI
Input HIInput HI
Sense LO
Input LO
7701 Configuration Example
7701 32-Channel common-side
4-wire Ohms configuration example