User manual
Section 13: Instrument Control Library (ICL)  Series 3700 System Switch/Multimeter Reference Manual 
13-48  3700S-901-01 Rev. C / July 2008 
channel.getclose() 
Example 
To see the channels and analog backplane relays that are closed on Slot 5: 
ClosedSlot5 = channel.getclose('slot5') 
To see all channels and analog backplane relays that are closed in a system: 
AllClosed = channel.getclose('allslots') 
To see all channels closed within a pattern called 'mychans': 
ClosedMyChans = channel.getclose('mychans') 
To see all channels closed from Channel 1 to 20 on Slot 3: 
ClosedRange = channel.getclose('3001:3020') 
To see Channels 1, 2, 3, 5 and analog backplane relay 1 and 2 in Bank 1 on Slot 3: 
ClosedOnes = channel.getclose('3001, 3002,  
3003, 3005, 3911, 3912') 
channel.getcount() 
Function 
Returns a string with the close counts for specified items. 
Usage 
counts = channel.getcount(<ch_list>) 
ch_list: string listing the items to query. Items can include channels, backplane relays, 
and channel patterns. 
counts: comma-delimited string listing the channel close counts. 
Remarks 
This function returns a comma-delimited string of numbers representing the close 
counts for each channel specified in parameter list. The count values are returned in 
the same order as the channels were specified. The close counts for an analog 
backplane relay might be included in the ch_list parameter. 
The parameter string can contain 'slotX', where X equals 1 to 6, or 
'allslots'. It can also contain a pattern which gets translated into the channels 
and analog backplane relays. Use the channel pattern get command (see 
channel.pattern.getimage() (on page 13-62)) with the pattern name to see 
the channels that the close counts pertain to, along with the channel order. 
An error is generated if: 
  Syntax error in parameter string exists. 
  An empty parameter string is specified or a parameter string with just spaces 
exists. 
  A specified channel is invalid. 
  The channel number does not exist for slot specified. 
  Slot is empty. 
  Does not have a count closure associated with it. 










