User manual

Section 12: Status Model Series 3700 System Switch/Multimeter Reference Manual
12-8 3700S-901-01 Rev. C / July 2008
Measurement event register (measurement)
The measurement event register (measurement) provides summary information
to the status byte's measurement summary bit (MSB) (Bit 0).
Figure 12-7: Measurement event register
Status function summary
The following functions control and read the various registers.
NOTE * = .ntr, .ptr, .enable, .event, and .condition. The first three (.ntr, .ptr,
and .enable) are read/write, while the last two (.event and .condition)
are read only.
Type
Function
System summary
status.reset
status.node_enable
status.request_enable
status.node_event
status.request_event
status.condition
Measurement event
status.measurement.*
Operation event
status.operation.*
status.operation.user.*