User manual

Section 4: Using the Front Panel Series 3700 System Switch/Multimeter Reference Manual
4-24 3700S-901-01 Rev. C / July 2008
OPENDETECT
Configures the state of the thermocouple or 4-wire ohms open detector that is
being used. Related ICL command: dmm.opendetector (on page 13-155).
RANGE
Configures the range of DMM for the selected function for one channel type. For
more information, see Range (on page 5-1). Related ICL command: dmm.range
(on page 13-156).
REL
Opens the REL menu for the selected DMM function. See REL key configuration
(on page 4-30).
THERMO
Selecting the THERMO menu item opens the THERMO menu. Items contained
in this menu are:
REFJUNCT: Allows selection of the reference junction to use. Available
choices are: SIMULATED, EXTERNAL, or INTERNAL. Related ICL
command: dmm.refjunction (on page 13-157).
SIMREF: Specifies the simulated reference temperature for thermocouples.
Related ICL command: dmm.simreftemperature (on page 13-169).
THERMISTOR: Specifies the type of thermistor. Related ICL command:
dmm.thermistor (on page 13-170).
THERMOCOUPLE: Specifies the thermocouple type. Related ICL
command: dmm.thermocouple (on page 13-171).
TRANSDUCER: Selects the transducer type (THERMOCOUPLE,
THERMISTOR, 3RTD, or 4RTD). Related ICL command: dmm.transducer
(on page 13-173).
THREERTD: Specifies the type of 3-wire RTD. Related ICL command:
dmm.threertd (on page 13-172).
FOURRTD: Specifies the type of 4-wire RTD. Related ICL command:
dmm.fourrtd (on page 13-137).
USER: Specifies USER type of RTD (ALPHA, BETA, DELTA, or ZERO).
Related ICL commands: dmm.rtdalpha (on page 13-162), dmm.rtdbeta (on
page 13-163), dmm.rtddelta (on page 13-164), dmm.rtdzero (on page 13-
165).
THRESHOLD
Configures the threshold range. Related ICL command: dmm.threshold (on page
13-173).