User manual

Series 3700 System Switch/Multimeter Reference Manual Section 3: TSP Advanced Features
3700S-901-01 Rev. C / July 2008 3-3
The second method to run parallel test scripts is to use groups with a single
TSP-Link network. A group consists of one or more nodes with the same group
number. Each group on the TSP-Link network can run different test scripts at the
same time (in parallel).
The following figure displays a TSP-Link network with groups. This method
requires one TSP-Link network and a single GPIB connection to the PC.
Figure 3-2: Single TSP-Link network with groups