User manual

Series 3700 System Switch/Multimeter Reference Manual Section 2: TSP Programming Fundamentals
3700S-901-01 Rev. C / July 2008 2-29
Saving a script from the Series 3700 front panel
To save a script to internal memory or a USB flash drive:
1. Press the MENU key to bring up the Main Menu.
2. Select the SCRIPT option.
3. Select the SAVE option to bring up a menu listing the scripts available to
save from the script.user.scripts table. This may take several
seconds before displaying.
4. Select the script that you want to save. It may be the anonymous script or
one of the user-named scripts.
5. Select where you want to save the script, either in internal memory or on the
USB flash drive. You cannot save the anonymous script to internal memory.
Only named scripts can be saved internally.
Select INTERNAL to save the script to internal memory using the
script's name attribute.
Select USB, and a prompt will display for a filename using the first 13
characters of the name attribute as a default name followed by a
modifiable 3-digit number. If the filename exists, the word (overwrite)
appears on the display. The file is automatically saved with a .tsp
extension.
Modifying a user script
You can modify a user script stored in nonvolatile memory by retrieving the
script listing, which can then be modified, loaded, and saved in nonvolatile
memory. See Retrieving a user script (on page 2-30) for details.
NOTE If you are using the Test Script Builder to modify a user script stored in
nonvolatile memory, retrieve the script listing from the Project
Navigator.