User manual

Series 3700 System Switch/Multimeter Reference Manual Section 13: Instrument Control Library (ICL)
3700S-901-01 Rev. C / July 2008 13-179
eventlog.clear()
Also see
LXI event log (on page 11-7)
eventlog.enable (on page 13-179)
eventlog.count (on page 13-179)
eventlog.next() (on page 13-180)
eventlog.all() (on page 13-178)
eventlog.count
Attribute
Reads the number of events contained in the event log.
Usage
To read the number of events:
N = eventlog.count
N: The number of events contained in the event log.
Remarks
This attribute indicates the present number of events contained in the event log.
Also see
LXI event log (on page 11-7)
eventlog.enable (on page 13-179)
eventlog.clear() (on page 13-178)
eventlog.next() (on page 13-180)
eventlog.all() (on page 13-178)
Example
To display the present number of events contained the Series 3700 event log:
print(eventlog.count)
eventlog.enable
Attribute
Reads or controls event log status.
Usage
To read event log status:
status = eventlog.enable
To write event log status:
eventlog.enable = status
status: The enable status of the event log: Use one of the following:
eventlog.ENABLE or 1: event log enable
eventlog.DISABLE or 0: event log disable
Remarks
This attribute indicates or controls the present status of the Series 3700 event log.
When the event log is disabled (eventlog.DISABLE or 0), no events will be added
to the event log.