User manual

Series 3700 System Switch/Multimeter Reference Manual Section 13: Instrument Control Library (ICL)
3700S-901-01 Rev. C / July 2008 13-29
Error Message
Description
invalid label or pattern
name
A string was found in the channel list
that does not specify any known label or
pattern name.
no patterns accepted
A pattern was specified for an ICL
command that does not support patterns
as input.
no multiple channels
accepted
Multiple channels were specified for an
ICL command that acts only on a single
channel.
no range specifier accepted
A range was specified for an ICL
command that does not support a range
as input.
no slot specifier accepted
An entire slot was specified using
slotX (for example, slot1) for an ICL
command that does not support slotX
as input.
no all slots specifier
accepted
All slots were specified using
allslots for an ICL command that
does not support allslots as input.
no labels accepted
A label was specified for an ICL
command that does not support labels
as input.
no paired channels accepted
A channel was specified for an ICL
command that does not act on paired
channels.
no single channels accepted
A single channel was specified for an
ICL command that only supports acting
on groups of channels.
no multiple specifiers
accepted
Multiple descriptions were specified for
an ICL command that does not support
multiple descriptions in a list.
channels all must be of
same type
The provided channel list contains
channels or various channel types, but
the ICL command supports only channel
lists that contain a single, consistent
channel type.
forbidden channel
The channel specified is forbidden to be
closed.