User manual

Section 12: Status Model Series 3700 System Switch/Multimeter Reference Manual
12-20 3700S-901-01 Rev. C / July 2008
Figure 12-10: Standard event register
Commands to program and read the register are summarized in the table below.
Refer to the status.standard ICL command for the attributes to control bits.
Commands
Description
*ESR?
or
print(status.standard.event)
Read standard event status register.
*ESE <mask>
or
status.standard.enable = <mask>
Program the event status enable
register: <mask> = 0 to 255
Refer to the status.standard.*
(on page 13-278) ICL command
*ESE?
or
print(status.standard.enable)
Read event status enable register.