User manual

Series 3700 System Switch/Multimeter Reference Manual Section 1: Introduction
3700S-901-01 Rev. C / July 2008 1-3
WARNING Before removing (or installing) switching modules, make
sure you turn off the Series 3700 and disconnect the line
cord. Also, remove any other external power connected to
the instrument or switching module(s).
Failure to disconnect power before removing (or installing)
switching modules may result in personal injury or death
due to electric shock.
Displaying the unit's serial number
To display the serial number on the front panel:
NOTE If the Series 3700 is in remote mode, press the EXIT key once to
place the unit in local mode.
1. When in local mode, press the MENU key.
2. Scroll to the SYSTEM-INFO menu and press the ENTER key.
3. On the SYSTEM INFORMATION menu, scroll to the SERIAL# and press
the ENTER key. The Series 3700 serial number will be displayed.