User manual

Section 8: Scanning Series 3700 System Switch/Multimeter Reference Manual
8-28 3700S-901-01 Rev. C / July 2008
Synchronous trigger mode
The synchronous trigger mode is a combination of SynchronousA and
SynchronousM trigger modes. Use the synchronous trigger mode for backwards
firmware compatibility.
The SynchronousA and SynchronousM trigger modes provide additional
flexibility. It is recommended that you use SynchronousA and SynchronousM for
firmware v1.4.0 or higher, and use the synchronous trigger mode for firmware
prior to v1.4.0.
Figure 8-14: Synchronous input trigger