User manual

Series 3700 System Switch/Multimeter Reference Manual Section 6: Relative, Math, and dB
3700S-901-01 Rev. C / July 2008 6-11
dB scanning
Each channel in a scan may be configured to use dB. Create a configuration
that has the dB enabled for units for the desired function by using the
dmm.configure.set command. Once the configuration exists, use the
dmm.setconfig() (on page 13-168) command to connect the configuration to
the desired channels. Now the channels can be added to scanning (see
scan.create() (on page 13-234) and scan.add() (on page 13-230)
commands). To remotely control the units for AC and DC volts, use the
dmm.units (on page 13-174) command.