User manual

Section 4: Using the Front Panel Series 3700 System Switch/Multimeter Reference Manual
4-34 3700S-901-01 Rev. C / July 2008
OPEN key
Press the OPEN key to open selected channels or channel patterns.
RATE key
Press the RATE key to set the measurement speed (fast, medium, or slow) for
the active or selected function. For more information, see Rate (on page 5-5).
RECall key
Press the RECall key to display stored readings and buffer statistics for selected
reading buffer. Use the  CURSOR  keys or turn the navigation wheel to
navigate through the buffer. For more information, see Recalling readings (on
page 7-5).
STEP key
Press the STEP key to step through the defined scan list, where each press
results in one scan step.
NOTE You cannot use an external trigger event, like digital I/O, for the
channel stimulus setting of the trigger model when using the STEP
key. For more information, see Scanning (on page 7-1) and Trigger
model (on page 8-4).