User manual

Series 3700 System Switch/Multimeter Reference Manual Section 4: Using the Front Panel
3700S-901-01 Rev. C / July 2008 4-31
SCAN key
If the scan list is present, press the SCAN key to open the SCAN ACTION
menu.
The SCAN ACTION menu contains the following items:
NOTE Use the INSERT key to create and add the present active channel to
the scan list.
BACKGROUND: Runs the scan. Related ICL command: scan.background()
(on page 13-232).
CREATE: Displays following message: Use <INSERT> key.
LIST: Displays the scan list (turn the navigation wheel to scroll). Related ICL
command: scan.list() (on page 13-237).
CLEAR: Clears the scan list. Related ICL command (when sent with an
empty string): scan.create() (on page 13-234).
RESET: Resets the scan settings to factory default values. Related ICL
command: scan.reset() (on page 13-242).
SCAN key configuration
Press the CONFIG key and then the SCAN key to open the SCAN ATTR menu.
The SCAN ATTR menu contains the following items:
ADD: Instructs how to add an additional list of channels and/or channel
patterns to scan. When you select ADD from the SCAN ATTR menu, "Use
<INSERT> key" is displayed for a few seconds before going back to the
SCAN ATTR menu options. To add items to an existing scan list, press
INSERT.
NOTE Press the INSERT key when you are not in the SCAN ATTR
menu on the MAIN display.
BYPASS: Enables or disables bypassing the first item in the scan. Related
ICL command: scan.bypass (on page 13-233).