User manual

Section 4: Using the Front Panel Series 3700 System Switch/Multimeter Reference Manual
4-30 3700S-901-01 Rev. C / July 2008
PATT key configuration
Press the CONFIG key and then the PATT key to open the PATTERN
ATTRibute menu.
The PATTERN ATTRibute menu contains the following item:
DMM_CONFIG: Sets the DMM configuration associated with the specified
channel pattern. Use the navigation wheel to scroll through the available
DMM configurations. Related ICL command: dmm.setconfig() (on page 13-
168).
REL key
Press the REL key to enable and disable relative for the selected function.
When enabled, the REL annunciator is lit. See Relative (on page 6-1).
REL key configuration
Press the CONFIG key and then the REL key to open the RELATIVE OFFSET
menu.
The RELATIVE OFFSET menu contains the following menu items:
ACQUIRE: Acquires an internal measurement to store as the REL level
value. Related ICL command: dmm.rel.acquire() (on page 13-158).
ENABLE: Enables or disables relative measurement control for the DMM.
Related ICL command: dmm.rel.enable (on page 13-159).
LEVEL: Sets a specific offset value to use for relative measurements for the
DMM. Related ICL command: dmm.rel.level (on page 13-160).
RUN key
Press the RUN key to run the last selected script or load menu item.