User manual

Section 4: Using the Front Panel Series 3700 System Switch/Multimeter Reference Manual
4-22 3700S-901-01 Rev. C / July 2008
AUTODELAY
Configures the auto delay setting for the active DMM function. Related ICL
command: dmm.autodelay (on page 13-112).
AUTORANGE
Configures the auto range setting for the DMM. Related ICL command:
dmm.autorange (on page 13-113).
AUTOZERO
Configures the auto zero setting for the DMM. Related ICL command:
dmm.autozero (on page 13-114).
DBREF
Configures the DB reference setting for the DMM in volts. Related ICL
command: dmm.dbreference (on page 13-131).
DETECTBW
Configures the detector bandwidth setting for the selected DMM function. For
more information, see Bandwidth (on page 5-7). Related ICL command:
dmm.detectorbandwidth (on page 13-132).
DIGITS
Configures the display digits setting for the selected DMM function. For more
information, see Digits ICL programming (on page 5-4). Related ICL command:
dmm.displaydigits (on page 13-132).
DRYCIRCUIT
Configures the dry circuit setting for the selected DMM function. Related ICL
command: dmm.drycircuit (on page 13-133).
FILTER
Opens the FILTER menu for the selected DMM function. See FILTER key
configuration (on page 4-25).
FUNC
Displays a menu that allows you to scroll through the available DMM functions.
Use the navigation wheel or CURSOR keys to scroll the menu options and press
ENTER as soon as the desired function is highlighted. Related ICL command:
dmm.func (on page 13-137).