User manual

Section 4: Using the Front Panel Series 3700 System Switch/Multimeter Reference Manual
4-18 3700S-901-01 Rev. C / July 2008
READ
Displays a value from a channel as 8-bit binary. This menu option does not
appear if a range of channels is selected. Related ICL command: channel.read()
(on page 13-67).
NOTE Only widths of one are supported by the front panel when reading or
writing to a Digital I/O channel.
WRITE
Writes a value to a channel. Enter the value as 8-bit binary. Related ICL
command: channel.write() (on page 13-83).
NOTE Only widths of one are supported by the front panel when reading or
writing to a Digital I/O channel.
RESET_STATE
Resets the channel state. Related ICL command: channel.resetstatelatch() (on
page 13-70).
RESET
Restores the factory default settings of selected channels or all channels.
Related ICL command: channel.reset() (on page 13-68).
CHAN key - TOTALIZER channel type
Press the CHAN key to open the TOTAL ACTION menu. Unless noted, the
menu option supports a range of selected channels.
READ
Displays a value from a channel as a number between 0 and 65535. This menu
option does not appear if a range of channels is selected. Related ICL
command: channel.read() (on page 13-67).
WRITE
Writes a value to a channel. Enter the value between 0 and 65535. Related ICL
command: channel.write() (on page 13-83).
RESET_STATE
Resets the channel state. Related ICL command: channel.resetstatelatch() (on
page 13-70).