User manual

Section 4: Using the Front Panel Series 3700 System Switch/Multimeter Reference Manual
4-16 3700S-901-01 Rev. C / July 2008
MODE
Sets the mode attribute on a channel. Select one of the following options:
FUNCTION. Sets the desired function for a channel. Select one of the
following options:
VOLTAGE
CURRENT_1
CURRENT_2
PROTECT. Indicates if the protection mode for a channel is enabled. Select
one of the following options:
AUTO
OFF
Related ICL command: channel.setmode() (on page 13-77).
OUTPUT
Sets the output enable attribute on a channel. Select one of the following
options:
ENABLE
DISABLE
Related ICL command: channel.setoutputenable() (on page 13-78)
STATE
Queries for the state of a channel and displays the value in the top line, labeled
by STATE=. Related ICL command: channel.getstate() (on page 13-56).
POWER
Sets the power state attribute on a channel. Select one of the following options:
ENABLE
DISABLE
Related ICL command: channel.setpowerstate() (on page 13-80)
DISPLAY key
Press this key to toggle between the main and user display modes.