User manual

Section 4: Using the Front Panel Series 3700 System Switch/Multimeter Reference Manual
4-14 3700S-901-01 Rev. C / July 2008
MODE
Sets the mode attribute on a channel. Select one of the following options:
EDGE. Indicates the edge for the Totalizer channel to increment its count.
Select from one of the following options:
FALLING
RISING
THRESHOLD. Indicates the threshold range. Select from one of the
following options:
TTL
NON_TTL
RESET. Indicates if the count value gets reset after being read. Select from
one of the following options:
ON
OFF
Related ICL command: channel.setmode() (on page 13-77).
MATCH
Sets the match value on a channel. Enter the value between 0 and 65535.
Related ICL command: channel.setmatch() (on page 13-76).
MATCH_TYPE
Sets the match type on a channel. Select one of the following options:
EXACT
ANY
NOT_EXACT
NONE
Related ICL command: channel.setmatchtype() (on page 13-76).
STATE
Queries for the state of a channel and displays the value in the top line, labeled
by STATE=. Related ICL command: channel.getstate() (on page 13-56).