User manual

Series 3700 System Switch/Multimeter Reference Manual Section 4: Using the Front Panel
3700S-901-01 Rev. C / July 2008 4-13
MODE
Sets the mode attribute on a channel. Select one of the following options:
INPUT
OUTPUT
OUTPUT_PROTECTED
Related ICL command: channel.setmode() (on page 13-77).
MATCH
Sets the match value on a channel. Enter the value as 8-bit binary. Related ICL
command: channel.setmatch() (on page 13-76).
MATCH_TYPE
Sets the match type on a channel. Select one of the following options:
EXACT
ANY
NOT_EXACT
NONE
Related ICL command: channel.setmatchtype() (on page 13-76).
STATE
Queries for the state of a channel and displays the value in the top line, labeled
by STATE=. Related ICL command: channel.getstate() (on page 13-56).
CONFIG CHAN key - TOTALIZER channel type
Press the CONFIG CHAN key to open the TOTAL ATTR menu. The TOTAL
ATTR menu is not available when a range of channels is selected. If a range is
selected, pressing CONFIG CHAN displays the following:
TOTAL ATTR MENU
<No Edit by Range, Use EXIT>
Therefore, to see the following options, select a single Totalizer channel.
LABEL
Enter up to 12 characters for the label for a channel. Related ICL command:
channel.setlabel() (on page 13-74).