Datasheet

ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY
(U.S. only)
A Tektronix Company
Connectors, Adapters, and Tools
Model 7018-ST: Extra quick disconnect screw
terminal board. One 7018-ST is included with
each 7018-S.
For use with: 7018-S
Model 7072-TRT: Triax removal tool used to
connect or disconnect triax style connectors
when clearance is limited making it difficult to
mate or unmate a connector with your fingers.
For use with: 707B, 708B
Model 7074-CIT: Contact extraction tool for
removal of contacts from cables and con nec tors.
For use with: 7152-KIT, 7152-MTR
Model 7078-CIT: Contact insertion and ex trac-
tion tool for assembly and main te nance of
7078-MTC cables and connec tors.
For use with: 7078-KIT, 7078-MTR, 7152-KIT,
7152-MTR
Model 7078-HCT: Contact crimping pliers
for as sem bly of cables and connectors using
7078-MTR or 7078-KIT.
For use with: 7078-KIT
Model 7078-KIT: 38-pin male plug assembly
with strain relief and 40 con tacts for assembly
of custom cable and harnesses compatible with
Model 7071 8×12 Matrix Card, Model 7071- 4
Dual 4×12 Matrix Card, and 7078-MTR Mass Ter-
mi nat ed Receptacle. Re quires 7078-HCT; recom-
mend 7078-CIT.
For use with: 7071, 7071-4, 7074-D, 7078-MTR
Model 7078-MTR: 38-pin female bulkhead
mount re cep ta cle with 40 contacts for custom
interface and patch panels compatible with
7078-MTC and 7078-KIT. Requires 7078-HCT;
recommend 7078-CIT.
For use with: 7078-KIT, 7078-MTC, 7071,
7071-4
Model 7078-TRX-BNC: 3-slot male triax to BNC
adapter for use with 7072 Semi con duc tor Matrix
Card and 4801 cables.
For use with: 4210-CVU, 4801, 6482, 6487,
6514, 6517A, 6517B, 7072, 7072-HV
Model 7078-TRX-GND: 3-slot male triax to
female BNC adapter (guard removed) for adapt-
ing non-guarded measurements to the Model
7072 or 7072-HV Semi con duc tor Matrix Cards or
8006 or 8008 Test Fixtures.
For use with: Series 2600B, 4801, 6517A,
6517B, 7072, 7072-HV
Connectors, adapters, and tools Connectors, adapters, and tools