Datasheet

ACCESSORIES
www.keithley.com
1.888.KEITHLEY
(U.S. only)
A Greater Measure of Confidence
A Tektronix Company
Model 237-TRX-TBC: 3-lug female triax bulk-
head connector with cap for assembly of custom
panels and interface connections. High voltage
rating for use with 7072-HV, etc. Uses miniature
coax cable, not triax cable, at soldered end.
Bulkhead is outer shield.
For use with: 7072, 7072-HV, 7078-TRX cables
Model 2182-325A: Silver solder for making
connections in experiments with the Model
2182A. 20 ft roll.
For use with: 2182A
Model 2182-KIT Low-Thermal Connector with
Strain Relief: Connector kit for building a cus-
tom input cable for the Model 2182A Nano volt-
meter. Includes a low-thermal (LEMO) connector
and a strain relief.
For use with: 2182A, SC-93
Model 2188 Low-Thermal Calibration
Shorting Plug: A low-resistance, low- thermal
shorting plug required to calibrate the Model
2182A Nanovoltmeter. Made of a LEMO con-
nector with its pin connectors shorted together
using copper wire and Sn/Ag4 silver solder.
For use with: 2182A
Model 2230G-30-1-JUMPER Shorting Jumper
for CS-1655-15 Connector: Used to short a
source and sense output when using a 2-wire
output configuration.
For use with: Series 2200 Power Supplies
Model 2230GJ-30-1-JUMPER Shorting Jumper
for CS-1655-15 Connector: Used to short a
source and sense output when using a 2-wire
output configuration.
For use with: Series 2200 Power Supplies
Model 2260-001: Accessory Kit: Analog control
mating connector, pins, cover, and ground wire.
For use with: Series 2260B
Model 2260-002: Simple IDC tool.
For use with: Series 2260B
Model 2260-003: Contact removal tool.
For use with: Series 2260B
Model 2260-004 Accessory Kit: Air filter,
analog connector cover, analog control lock
lever, M8-size output terminal bolts, washers
and screws, and M4-size output terminal screws
with washers.
For use with: Series 2260B
Connectors, Adapters, and Tools
Connectors, adapters, and tools Connectors, adapters, and tools