Datasheet

ACCESSORIES
www.keithley.com
1.888.KEITHLEY
(U.S. only)
A Greater Measure of Confidence
A Tektronix Company
Adapter, Cable, Prober, and Stabilizer Kits
Model 4200-CVU-PROBER-KIT: Commonly
used accessories for taking standard capaci-
tance-voltage measurements on a variety of
probers. Includes:
CA-446A: CVU cable, 100W, 3m (9.8 ft) (4)
CS-565: Female BNC to female BNC adapter (4)
CS-1247: Female SMA to male BNC adapter (4)
CS-1391: SMA tee adapter (female-male-female) (2)
237-TRX-BAR: Female triax to female triax
adapter (4)
4200-PRB-C: SMA to SSMC Y adapter cable with
local ground (2)
7078-TRX-BNC: 3-slot male triax to female BNC
adapter (4)
7078-TRX-GND: 3-slot male triax to female BNC
adapter (guards removed) (4)
For use with: 4200-SCS with 4200-CVU
Model 4200-CVU-PWR: Enables C-V measure-
ments with a DC voltage bias of up to ±200V
or 400V differential (0 to ±400V) and a current
output of up to 300mA. Includes:
CS-1252: SMA male to BNC female adapter (2)
CS-1391: SMA tee (female-male-female) (2)
CS-1479: SMA male to BNC male adapter (2)
4200-PRB-C: SMA to SSMC Y adapter cable with
local ground (2)
4205-RBT: Remote bias tee (2)
For use with: 4200-SCS with 4210-CVU
Model 4200-PMU-PROBER KIT: This
connection kit consists of standard and custom
connectors and accessories used to connect the
Models 4225-PMU and 4220-PGU to a variety
of common prober stations. It also supports
directly connecting the PMU/PGU to the SMU
instruments for Flash Memory testing without
the need for an external switch. One kit required
per PMU/PGU card. Includes:
CA-19-2: BNC male to BNC male coax cable,
1.5m (4)
CA-451A: SMA male to SMA male coax cable,
11cm (1)
CA-405B: SMA male to SMA male coax cable,
15cm (1)
CA-452A: SMA male to SMA male coax cable,
20cm (2)
CS-565: BNC female to BNC female barrel (2)
CS-712: BNC female to triax male adapter (2)
CS-1252: SMA male to BNC female adapter (4)
CS-1247: SMAL female to BNC male adapter (4)
CS-1390: Micro triax (LEMO) to SMA
(no guard) (2)
CS-1391: SMA tee female-male-female (3)
For use with: 4200-SCS, 4225-PMU,
4220-PGU, 4225-RPM, 4210-MMPC
Model 4210-MMPC-C: This multi-measurement
cable set is a collection of standard and custom
connectors and accessories used to take I-V, C-V,
and pulsed I-V measurements using a single
prober cable setup. The set includes:
CA-533-24A: 61cm (24 in) mini triax/full triax,
100W, blue cable (2)
CA-535-4A: 10cm (4 in) prober ground jumper
CA-540-12A: 35cm (12 in) mini triax/mini triax,
100W, blue cable
CS-712: Triax male to BNC female adapters (3)
CS -737: Triax tee adapter, female-male-female
CS-1247: SMA female to BNC male adapters (3)
4210-MMPC-304A: Grounding bracket assembly
4210-MMPC-305A: Mini triax, 3-lug, shorting
plug (shorts center pin to outer shield)
For use with: Model 4200-SCS and Cascade
Microtech 12000 prober series with DCM-200
Series manipulators (requires one set per
manipulator)
Model 4210-MMPC-S: This multi-measurement
cable set is a collection of standard and custom
connectors and accessories used to take I-V, C-V,
and pulsed I-V measurements using a single
prober cable setup. The set includes:
CA-532A: MMPC prober cable assembly
CA-534-24A: 61cm (24 in) male triax to male
triax, 100W, blue cables (2)
CA-535-7A: 17.8cm (7 in) prober ground jumper
CS-712: Triax male to BNC female adapters (3)
CS -737: Triax tee adapter, female-male-female
CS -751: Triax female to triax female adapters (2)
CS-1247: SMA female to BNC male adapters (3)
CS -1546: Triax shorting plug (shorts center pin
to outer shield)
For use with: Model 4200-SCS and SUSS
MicroTec PA200/300 prober series (requires
one set per manipulator)
Connectors, adapters, and tools · Adapter, cable, and stabilizer kits Connectors, adapters, and tools · Adapter, cable, and stabilizer kits