Datasheet

ACCESSORIES
A Greater Measure of Confidence
www.keithley.com
1.888.KEITHLEY
(U.S. only)
A Tektronix Company
Connectors, Adapters, and Tools
Model 7788: 50-pin D subminiature connector
kit. To mate with 50-pin connector on Model
7703 and 7705.
For use with: 7703, 7705, 77xx modules with
D-sub connectors
Model 7789: 50-pin/25-pin (both male) D-Shell
Kit (one of each) for 7701 or 7709 Integra mod-
ules (mating connectors are supplied with these
modules when purchased).
For use with: 7701, 7709
Model 7790: 50 pin male, 50 pin female, 25 pin
male IDC D-Shell Connector Kit (one each).
For use with: 7701, 7703, 7705, 7707, or 7709
Integra modules
Model 8610 Low Thermal Shorting Plug: For
cal i bra tion lab use, this plug provides a very low
thermal offset short at front or rear inputs.
For use with: All DMMs
Model 8620 Four-Wire DMM Shorting Plug:
Provides a low resistance 4-wire short to both
observe and cancel DMM offset resistances and
voltages to improve measurement accuracies.
For use with: All DMMs, Series 2400, Series
2700, Series 3700A
Model 8680 RTD Probe Adapter: Provides a
means of connecting RTD probes terminated in
either a 4-wire in stru men ta tion connector or bare
wires to safety input jacks on a 0.5 inch spacing.
For use with: 2001, 2002, 2010, 2100, 2110,
8681
BG-18: Dual banana to BNC coaxial adapter for
adapting connection on instrument with dual
banana jack.
For use with: All DMMs, Series 2400
CAP-18: Protective shield/cap for BNC
connectors.
For use with: BNC connectors
CAP-31: Protective shield/cap for 3-lug triax
connectors.
For use with: 3-lug triax connectors
CS-400: DB25 male solder cup.
For use with: C126-1 cable, 213
Connectors, adapters, and tools Connectors, adapters, and tools