User manual

3390-900-01 Rev. C / January 2009 Return to Section Topics A-17
Model 3390 Arbitrary Waveform Generator User’s Manual Appendix A: SCPI Command Reference
:VERSion?
Query the instrument’s current SCPI
version.
:BEEPer
Issue a single beep tone.
:BEEPer:STATe {OFF | ON}
See Instrument system operations.
:BEEPer:STATe?
Query the on/off state of the system
sound.
:KLOCk[:STATe]
{OFF | ON}
Disable or enable the front panel key
lock.
:KLOCk:EXCLude
{NONE | LOCal}
Choose to include or exclude the Local
key when locking the front panel keys.
:KLOCk:EXCLude?
Query if Local key is included or excluded
when locking the front panel keys.
:SECurity:IMMediate
Clear all memory except startup
parameters and calibration constants.
Reset all settings to their
*RST values.
Interface configuration commands
Command Parameters Definition
SYSTem
:COMMunication:
RLSTate
{LOCal | REMote | RWLock}
Set the instrument state to local, remote,
or remote with lock.
Phase-lock commands
Command Parameters Definition
PHASe {<angle> | MINimum |
MAXimum}
See 10 MHz Out and In connectors.
PHASe? [MINimum | MAXimum]
Query the phase offset value.
PHASe
:REFerence
See 10 MHz Out and In connectors.
:UNLock:ERRor:STATe {OFF | ON}
See 10 MHz Out and In connectors.
:UNLock:ERRor:STATe?
Query the on/off state of the unlock error
setting.
UNIT
:ANGLe {DEGree | RADian}
See 10 MHz Out and In connectors.
:ANGLe?
Query the phase offset value.
Status reporting commands
NOTE All other status reporting commands are included in the applicable IEEE-488.2 common
commands section.
Command Parameters Definition
STATus
:PREset
See Questionable Data Register.
:QUEStionable:
CONDition?
Query the condition register.
:QUEStionable:
ENABle
<enable value>
See Questionable Data Register.
:QUEStionable:
ENABle?
Query the enable register.
:QUEStionable
[:EVENt]?
Query the event register.
Table A-6:
SCPI command summary