User manual

A-16 Return to Section Topics 3390-900-01 Rev. C / January 2009
Appendix A: SCPI Command Reference Model 3390 Arbitrary Waveform Generator User’s Manual
:PATTern:OUTPut:
TRIGger
{OFF | ON}
See Pattern output operation.
:PATTern:OUTPut:
TRIGger?
Query the on/off state of the trigger.
:PATTern:OUTPut:
TRIGger:SLOPe
{POSitive | NEGative}
See Pattern output operation.
:PATTern:OUTPut:
TRIGger:SLOPe?
Query the edge for the output trigger
slope.
DATA
:PATTERN VOLATILE <binary block>
See Pattern output operation.
Trigger commands
NOTE All other trigger commands are included in the applicable Sweep or Burst section.
Command Parameters Definition
TRIGger
Issue a trigger from the remote interface.
*TRG
Issue a trigger from the remote interface.
State storage commands
Command Parameters Definition
*SAV {0|1|2|3|4}
See Instrument system operations.
*RCL {0|1|2|3|4}
See Instrument system operations.
MEMory
:STATe:NAME {0|1|2|3|4} [<name>]
See Instrument system operations.
:STATe:NAME?
{0|1|2|3|4}
Query the name of the specified storage
location.
:STATe:DELete {0|1|2|3|4}
See Instrument system operations.
:STATe:RECall:AUTO
{OFF | ON}
Enable or disable automatic recall of the
power-down state from the “0” location
when power is turned on. See Default
settings.
:STATe:RECall:AUTO?
Query the on/off state of automatic recall
of the power-down state.
:STATe:VALid? {0|1|2|3|4}
See Instrument system operations.
:NSTates?
Query the number of available state
storage locations.
System-related commands
NOTE All other system-related commands are included in the applicable IEEE-488.2 common
commands section.
Command Parameters Definition
DISPLay {OFF | ON}
See Instrument system operations.
DISPLay?
Query the on/off state of the display.
DISPlay
:TEXT <quoted string>
See Instrument system operations.
:TEXT?
Query the message sent to the front
panel display.
:TEXT:CLEar
See Instrument system operations.
SYSTem
:ERRor?
Query and clear one error from the error
queue.
Table A-6:
SCPI command summary