User manual

3390-900-01 Rev. C / January 2009 Return to Section Topics A-13
Model 3390 Arbitrary Waveform Generator User’s Manual Appendix A: SCPI Command Reference
:DEViation? [MINimum | MAXimum]
Query the phase deviation.
:SOURce {INTernal | EXTernal}
See Phase modulation.
:SOURce?
Query the modulating source.
:STATe {OFF | ON}
See Phase modulation.
:STATe?
Query the on/off state of phase
modulation.
Frequency-shift keying commands
Command Parameters Definition
FSKey
:FREQuency {<frequency> | MINimum |
MAXimum}
See Frequency-shift keying modulation.
:FREQuency? [MINimum | MAXimum]
Query the hop frequency.
:INTernal:RATE {<rate in Hz> | MINimum |
MAXimum}
See Frequency-shift keying modulation.
:INTernal:RATE? [MINimum | MAXimum]
Query the frequency-shift keying rate.
:SOURce {INTernal | EXTernal}
See Frequency-shift keying modulation.
:SOURce?
Query the frequency-shift keying source.
:STATe {OFF | ON}
See Frequency-shift keying modulation.
:STATe?
Query the on/off state of frequency-shift
keying.
Pulse width modulation commands
Command Parameters Definition
PWM
:INTernal:FUNCtion {SINusoid | SQUare | RAMP |
NRAMp | TRIangle | NOISe |
USER}
See Pulse width modulation waveform.
:INTernal:FUNCtion?
Query the internal modulating function.
:INTernal:FREQuency {<frequency> | MINimum |
MAXimum}
See Pulse width modulation waveform.
:INTernal:FREQuency? [MINimum | MAXimum]
Query the internal modulating frequency.
:DEViation {< deviation in seconds> |
MINimum | MAXimum}
See Pulse width modulation waveform.
:DEViation? [MINimum | MAXimum]
Query the pulse width deviation.
:DEViation:DCYCle {< deviation in percent> |
MINimum | MAXimum}
See Pulse width modulation waveform.
:DEViation:DCYCle? [MINimum | MAXimum]
Query the duty cycle deviation.
:SOURce {INTernal | EXTernal}
See Pulse width modulation waveform.
:SOURce?
Query the modulating source.
:STATe {OFF | ON}
See Pulse width modulation waveform.
:STATe?
Query the on/off state of PWM.
Sweep commands
Command Parameters Definition
FREQuency
:STARt {<frequency> | MINimum |
MAXimum}
See Frequency sweep.
:STARt? [MINimum | MAXimum]
Query the sweep start frequency.
Table A-6:
SCPI command summary