User manual

3390-900-01 Rev. C / January 2009 Return to Section Topics A-9
Model 3390 Arbitrary Waveform Generator User’s Manual Appendix A: SCPI Command Reference
SCPI command summary
5 32 Command syntax error exists.
6 64 Not used (always 0).
7 128 Power has been turned off and on. Event register is
cleared.
NOTE The list of IEEE-488.2 Common Commands for the Model 3390 is in the IEEE-
488.2 common commands section.
Table A-6:
SCPI command summary
APPLy commands
Command Parameters Definition
APPLy
:SINusoid
[<frequency>]
[<amplitude>]
[<offset>]
See Sine waveform.
:SQUare
See Square waveform.
:RAMP
See Ramp waveform.
:PULSe
See Pulse waveform.
:NOISe [<frequency | DEF>]
[<amplitude>] [<offset>]
See Noise waveform.
:DC [<frequency | DEF>]
[<amplitude| DEF>]
[<offset>]
Output a DC voltage at the specified
offset level.
:USER
[<frequency>]
[<amplitude>] [<offset>]
Output an arbitrary waveform currently
specified by the FUNC:USER command
with the set frequency, amplitude, and
offset.
:APPLy?
Query the current configuration.
Output configuration commands
Command Parameters Definition
FUNCtion
{SINusoid | SQUare | RAMP |
PULSe | NOISe | DC | USER}
See Sine waveform, Square waveform,
Ramp waveform, Pulse waveform, Noise
waveform, Amplitude modulation,
Frequency modulation, Phase
modulation, Frequency-shift keying
modulation, Burst operation.
FUNCtion?
Query the current output function.
FREQuency
{<frequency> | MINimum |
MAXimum}
See Sine waveform, Square waveform,
Ramp waveform, Pulse waveform, Noise
waveform, Amplitude modulation,
Frequency modulation, Phase
modulation, Frequency-shift keying
modulation, Burst operation.
FREQuency?
[MINimum | MAXimum]
Query the frequency setting for the
current function.
Table A-5:
Standard Event register
Bit Decimal value Description