User manual

3390-900-01 Rev. C / January 2009 Return to Section Topics 7-7
Model 3390 Arbitrary Waveform Generator User’s Manual Section 7: Remote Programming
Front panel for a review of the front panel keys. Detailed setup and operation instructions for the
output functions can be found in Section 4, Section 5, and Section 6 of this manual.
You will be prompted to login from this page. It is only necessary to enter the password, and you
can obtain the instrument’s password by following these steps:
1. Press the Utility key.
2. Press the I/O soft key.
3. Press the soft key under LAN to enter the LAN menu.
4. Press the Modify / Set soft key to enter the Modify / Set menu. The password is displayed.
Click the Refresh button to refresh the web page with the instrument’s current state.
Figure 7-1:
LXI browser Web Control interface
The IP Configuration page displays the current configuration of your instrument, and allows you to
modify configuration details.
You must log into the web interface to make configuration changes. Refer to the Web Control topic
for login details.
Click the Modify button to access the modification page. After you have entered your changes,
click the Submit button. To enable your changes, you must power the instrument off, and then
restart it.
The System Status page displays various details regarding your system configuration. This page is
for information only and cannot be changed.
IP Configuration
System Status