User manual

3390-900-01 Rev. C / January 2009 Return to Section Topics 6-3
Model 3390 Arbitrary Waveform Generator User’s Manual Section 6: System Operations
To store a state from a remote interface:
*SAV {0|1|2|3|4}
MEMory:STATe:NAME {0|1|2|3|4} [,<name>]
To recall a state:
1. Press the soft key under Recall / State to access the recall / state menu.
2. Press the soft key under your desired location number to recall the state from that memory
location (Figure 6-3).
3. Press the Recall / State soft key to recall the selected state, or press the Cancel soft key to
cancel the entry.
Figure 6-3:
Select the desired memory location for recall
To recall a state from a remote interface:
*RCL {0|1|2|3|4}
To set a power-up state:
1. Press the soft key under PwrON / Def to access the power-up menu.
2. Press the soft key under your desired location number to choose the state from that
memory location (1 through 4 are available from the front panel. You can also select
State / Def to set the power-up state to the default settings.
3. Press the DONE soft key to accept the selected state.
To delete the instrument state:
1. Press the soft key under Del / State to access the delete state menu.
2. Press the soft key under your desired location number to delete the state from that memory
location (Figure 6-4).
3. Press the Delete / State soft key to delete the selected state, or press the Cancel soft key
to cancel the entry.
Figure 6-4:
Select the desired memory location for deletion
To delete a state from a remote interface:
MEMory:STATe:DELete {0|1|2|3|4}