User manual

3390-900-01 Rev. C / January 2009 Return to Section Topics 4-9
Model 3390 Arbitrary Waveform Generator User’s Manual Section 4: Setup Basics
Restoring factory default settings
You can choose to reset the Model 3390 to its original factory default settings.
To restore factory default settings:
1. Press the Store / Recall key.
2. Press the soft key under Set to Def (Figure 4-8).
3. Press the soft key under YES to finish your selection (Figure 4-9).
Figure 4-8:
Setting the instrument to default
Figure 4-9:
Accept default setting change
To restore factory default settings from a remote interface:
*RST