Datasheet

Datasheet
TEK.COM14
SMU Pulse Characteristics
Region
Maximum
Current Limit
Maximum
Pulse Width
1
Maximum
Duty Cycle
2
1 1 A @ 40 V DC, no limit 100%
1 3 A @ 6 V DC, no limit 100%
2 1.5 A @ 40 V 100 ms 25%
3 5 A @ 35 V 4 ms 4%
4 10 A @ 20 V 1.8 ms 1%
5 5 A @ 6 V 10 ms 10%
+1.5A
+3A
+5A
–3A
–5A
+10A
–10A
–1A
+1A
–1.5A
+40V+6V
–6V
+20V–20V 0V
0A
+35V–35V–40V
DC
Pulse
Pulse
Pulse
Pulse
4
4
3
3
3
3
2
2
1
2
5
5
2
Minimum Programmable 100 µs. Note: Minimum pulse width for settled source at a given I/V output and load can be longer Pulse
Width
1, 3
than100µs.
Pulse Width
Programming Resolution 1 µs.
Pulse Width
Programming Accuracy ±5 µs.
Pulse Width Jitter 2 µs.
NOTES
1. Times measured from the start of pulse to the start off-time; see figure below.
Pulse Level
Bias Level
Start t
on
Start t
off
90%
10%
t
on
t
off
10%
2. Thermally limited in sink mode (quadrants II and IV) and ambient temperatures above 28 °C. See power equations in the reference manual for more information.
3. Typical performance for minimum settled pulse widths:
Source Value Load Source Settling (% of range) Min. Pulse Width
6 V
2 W
0.2% 150 µs
20 V
2 W
1% 200 µs
35 V
7 W
0.5% 500 µs
40 V
27 W
0.1% 400 µs
1.5 A
27 W
0.1% 1.5 ms
3 A
2 W
0.2% 150 µs
5 A
7 W
0.5% 500 µs
10 A
2 W
0.5% 200 µs