User Manual

13
Digital I/O Port, Output Enable, & Output Configuration
• Digital I/O port — Discusses the various input/output lines on the Digital I/
O Port as well as the +5V line that can be used to power external logic cir
-
cuits.
NOTE The Model 2401 does not use the digital output lines of the Digital I/O
port. Since the Model 2401 does not have a handler interface it cannot
be used with a component handler to perform binning operations.
• Output enable — Describes how to use the Digital I/O Port as output
enable cable.
• Front panel output configuration — Details configuration of the Digital I/
O Port as an output enable as well as configuring main output off states.
• Remote output configuration — Summarizes the remote commands
used to control the Digital I/O Port output enable and main output off states.
A simple programming example is also provided.