User manual

18-46 SCPI Command Reference 2400 Series SourceMeter
®
User’s Manual
Read display
DATA?
:DISPlay[:WINDow[1]]:DATA? Read top display
:DISPlay:WINDow2:DATA? Read bottom display
Description These query commands are used to read what is currently being dis-
played on the top and bottom displays. After sending one of these
commands and addressing the SourceMeter to talk, the displayed
data (message or reading) will be sent to the computer.
Define :TEXT messages
DATA <a>
:DISPlay[:WINDow[1]]:TEXT:DATA <a> Define message; top display
:DISPlay:WINDow2:TEXT:DATA <a> Define message; bottom display
Parameters <a> = ASCII characters for message
Types: String ‘aa...a’ or “aa...a”
Indefinite Block #0aa...a
Definite Block #XYaa...a
where: Y = number of characters in message:
Up to 20 for top display
Up to 32 for bottom display
X = number of digits that make up Y (1 or 2)
Query :DATA? Query the defined text message
Description These commands define text messages for the display. A message
can be as long as 20 characters for the top display, and up to 32
characters for the bottom display. A space is counted as a character.
Excess message characters result in an error.
An indefinite block message must be the only command in the pro-
gram message or the last command in the program message. If you
include a command after an indefinite block message (on the same
line), it will be treated as part of the message and is displayed
instead of executed.
STATe <b>
:DISPlay[:WINDow[1]]:TEXT:STATe <b> Control message; top display
:DISPlay:WINDow2:TEXT:STATe <b> Control message; bottom display
Parameters <b> = 0 or OFF Disable text message for specified display
1 or ON Enable text message for specified display
Query :STATe? Query state of message mode for specified display