User manual

F-16 Contact Check Function 2400 Series SourceMeter

User’s Manual

Table F-4

Contact check programming example

Command Description

*RST

:SYST:CCH ON

:SYST:CCH:RES 2

:SYST:RSEN ON

:CALC2:LIM4:STAT ON

:CALC2:LIM4:SOUR2 15

*:SENS:FUNC "RES"

:TRIG:SEQ2:SOUR CCH

:TRIG:SEQ2:TOUT 2

:OUTP ON

:INIT

:CALC2:LIM4:FAIL?

Restore GPIB defaults.

Enable contact check.

Set 2Ω contact resistance.

Enable 4-wire remote sense.

Enable contact check pass/fail.

Set Digital I/O bits all HI on failure.

*Select ohms function.

Enable contact check event detection.

Set 2 second contact check timeout.

Turn on output.

Trigger unit.

Query contact check pass/fail.

*NOTE: ":SENS:FUNC 'RES'" selects ohms as the measurement function but is

optional. Alternately, you could select any of the other valid measurement opera-

tions.