User manual

18-110 SCPI Command Reference 2400 Series SourceMeter
®
User’s Manual
Simulate key presses
KEY
:SYSTem:KEY <NRf> Simulate key-press
Parameters <NRf> = 1 RANGE up arrow key
2 SOURCE down arrow key
3 left arrow key
4 MENU key
5 FCTN key
6 FILTER key
7 SPEED key
8 EDIT key
9 AUTO key
10 right arrow key
11 EXIT key
12 V (SOURCE) key
13 LIMITS key
14 STORE key
15 V (MEAS) key
16 TOGGLE key
17 RANGE down arrow key
18 ENTER key
19 I (SOURCE) key
20 TRIG key
21 RECALL key
22 I (MEAS) key
23 LOCAL key
24 ON/OFF key
25 -----
26 SOURCE up arrow key
27 SWEEP key
28 CONFIG key
29 Ω key
30 REL key
31 DIGITS key
32 FRONT/REAR key
Query :KEY? Query last pressed key.
Description This command is used to simulate front panel key presses. For
example, to select the voltage measurement function (V), you can
send the following command to simulate pressing the V (MEAS) key:
:syst:key 15
The parameter listing provides the key-press code in numeric order.
Figure 18-3 also illustrates the key-press codes.