User manual

2400 Series SourceMeter
®
User’s Manual Getting Started 1-17
Clear pattern 15**
H/W limits:
Control Disabled
Fail mode: In compliance
Cmpl pattern 15
S/W limits:
Lim 2, 3, 5-12:
Control Disabled
Low limit: -1.0
Low pattern 15
High limit: +1.0
High pattern 15
Pass (all tests):
Pass pattern 15
Source memory
location
Next
EOT mode EOT
Numbers No effect
Ohms source mode Auto
Offset compensated ohms Off
Output Off
Output enable Disabled
Off state Normal*
Auto-off Disabled
Power-on default No effect
Pulse Mode (2430 only)
Pulse delay 0.0s
Pulse width 0.20ms
Ranging (measure):
Auto range Enabled
Rel Off
Value 0.0
RS-232 No effect
Sense mode 2-wire
Source delay 1ms
Auto-delay Enabled
Source shape (2430 only): DC mode
Speed Normal (1 PLC)
Sweep Linear staircase
Start 0V or 0A
Stop 0V or 0A
Step 0V or 0A
Sweep count 1
Sweep Pts 2500
Source ranging Best fixed
Abort on compliance Off
Table 1-2 (cont.)
Factory default settings