User manual

2400 Series SourceMeter
®
User’s Manual SCPI Command Reference 18-7
:CALCulate2
:CLEar Clear test results:
[:IMMediate] Clear latest limit test result and reset
Digital I/O port back to
:SOURce2:TTL settings.
:AUTO <b> Enable or disable clearing of test results
when :INITiate command is sent.
ON
:AUTO? Query state of auto clear.
:PASS Define pass digital output pattern.
Sorting mode only if limits 2, 3, 5-12
disabled.
:SOURce2 <NRf>
| <NDN>
Specify output pass pattern: (0 to 7,
3-bit; 0 to 15, 4-bit).
15 ✓
:SOURce2? Query pass bit pattern.*
:SMLocation <NRf>
| NEXT
Specify next PASS Source Memory
Sweep location (NEXT location or 1 to
100).
NEXT ✓
:SMLocation? Query PASS memory location.
:FAIL Define fail digital output pattern:
:SOURce2 <NRf>
| <NDN>
Specify output fail pattern: (0 to 7,
3-bit; 0 to 15, 4-bit).
15 ✓
:SOURce2? Query fail bit pattern.*
:SMLocation <NRf>
| NEXT
Specify next FAIL Source Memory
location (NEXT location or 1 to 100).
NEXT
:SMLocation? Query FAIL memory location.
:CALCulate3 Subsystem to control CALC3: ✓
:FORMat <name> Specify math format (MEAN, SDEViation,
MAXimum, MINimum, or PKPK).
MEAN ✓
:FORMat? Query math format. ✓
:DATA? Read math result of CALC3. ✓
* The format (ASCII, hexadecimal, octal, or binary) for the returned value is set by FORMat:SOURce2 <name>.
Table 18-1 (continued)
CALCulate command summary
Command Description
Default
parameter SCPI
Source
memory