User manual

12
Limit Testing
• Types of limits — Discusses the three types of limits: compliance, coarse
limits, and fine limits. Also summarizes the two operating modes: grading
and sorting.
• Operation overview — Covers binning control and pass/fail condition for
the grading and sorting modes.
• Binning systems — Details the handler interface, as well as single-ele-
ment and multiple-element binning and digital output clear pattern that
occurs after a binning operation.
NOTE The Model 2401 does not use the digital output lines of the Digital I/O
port. The Model 2401 does not have a handler interface and therefore
cannot be used with a component handler to perform binning operations.
• Configuring and performing limit tests — Describes how to configure
the SourceMeter for limit testing and summarizes a typical test procedure.
• Remote limit testing — Summarizes limit commands and provides a basic
programming example.