User manual

2400 Series SourceMeter
®
User’s Manual Getting Started 1-3
Inspection
The SourceMeter was carefully inspected electrically and mechanically before
shipment. After unpacking all items from the shipping carton, check for any obvi-
ous signs of physical damage that may have occurred during transit. (There may
be a protective film over the display lens, which can be removed.) Report any
damage to the shipping agent immediately. Save the original packing carton for
possible future shipment. The following items are included with every SourceMe-
ter order:
• SourceMeter with line cord.
• Test leads (Model 8605 for 2400, 2400-C; Model 1754 for all other series
2400 units).
• Accessories as ordered.
• Certificate of calibration.
• User’s Manual.
• Service Manual.
• Support Software Disk including TestPoint instrument library for GPIB and
LabVIEW for Windows driver.
• Manual addenda containing any improvements or changes to the instru-
ment or manual.
If an additional manual is required, order the appropriate manual package (for
example, 2400-901-00). The manual packages include a manual and any perti-
nent addenda.
Options and accessories
The following options and accessories are available from Keithley for use with the
SourceMeter.
Cables and adapters
Model 2499-DIGIO adapter — Lets you expand the Digital I/O port to 16 bits
instead of 4 bits.
Models 7007-1 and 7007-2 shielded GPIB cables — Connect the SourceMeter to
the GPIB bus using shielded cables and connectors to reduce electromagnetic
interference (EMI). The Model 7007-1 is 1m long; the Model 7007-2 is 2m long.
Models 8501-1 and 8501-2 trigger link cables — Connect the SourceMeter to
other instruments with Trigger Link connectors (e.g., Model 7001 Switch System).
The Model 8501-1 is 1m long; the Model 8501-2 is 2m long.
Model 8502 trigger link adapter — Lets you connect any of the six Trigger Link
lines of the SourceMeter to instruments that use the standard BNC trigger con-
nectors.