User Manual
18-14 SCPI Command Reference 2400 Series SourceMeter
®
User’s Manual
[:SENSe[1]]
:VOLTage[:DC]
:AVERage Path to configure and control digital filter: REPeat ✓
:TCONtrol <name> Specify filter type (MOVing or REPeat).
1
✓✓
:TCONtrol? Query filter type. ✓
:COUNt <n> Specify filter count (1 to 100).
1
10 ✓✓
:COUNt? Query filter count. ✓
[:STATe] <b> Enable or disable filter.
2
OFF ✓✓
[:STATe]? Query state of filter. ✓
1. For the Model 2430 Pulse Mode, filtering is not used. This command is ignored.
2. For the Model 2430 Pulse Mode, the filter cannot be enabled. This command is invalid (error +831).
Table 18-6 (continued)
SENSe command summary
Command Description
Default
parameter SCPI
Source
memory